|
|
| 105903 |
CAN-AM DS450 2008-09 A-ARMS, LONG TRAVEL, PRO SERIES, SILCAST, MAXIMUM GROUND CLEARANCE, LONGER AFRERMARKET SHOCK REQUIRED, NEEDLE BEARING STYLE, +1.1" WIDE, +0" FORWARD, GLOSS BLACK, TRIC-TRAC UPGRADABLE WITH CONVERSION KIT 100701 |
Note: May require longer brake lines (sold separately)
|
| 105601 |
CAN-AM DS450 2008-09 A-ARMS, REGULAR TRAVEL, SLICAST, STOCK LENGTH SHOCK, NEEDLE BEARING STYLE, +1.1 WIDE, +0" FORWARD, GLOSS BLACK |
Note: May require longer brake lines (sold separately)
| |
| |
100701 |
CANAM DS450 TRIC TRAC CONVERSION KIT. |
| Note: Can only be used on Houser Racing NEW PRO SERIES A-Arms |
| 102002 |
CAN-AM DS450 2008-09 NEEDLE BEARING & SEAL KIT. KIT INCLUDES 8x SLEEVES, x16 NEEDLE BEARING & 16x SEALS |
Houser Racing's Steering Stem for the Can-Am DS450 is the best stem on the market. HOUSER came up with the stem with the help and input from the Can-Am Warnert Racing Team
|
* Reduced Bump Steer: If you take a look at the Steering Stem you wil notice that the Tie Rod Mounting Plate is upside down. This was done to help the Bump Steer with the DS 450. Solving Bump Steer issues is no easy task. We suded advanced technology to develop the perfect Tied Rod Geometry
|
* Aluminium Doubled Sealed Ball Bearing Holder with Adjustable Stops: The Pro-Riders wanted to be able to adjust their steering radius so they could turn shaper that the stock OEM setup. So we have included a billet aluminium Bearing Holder that replaces the stock one. The holder has bolts and jam nuts to make adjusting your steering radius quick and easy
|
* Anti-Vibration Stem Stop: The upper portion of this Steering Stem accepts our Anti-Vibration Aluminium Handle Bar Clamp. The Handle Bar Clamp is mounted to the stem with 4-Cone Rubbers. This separates the Stem from the Clamp, causing a huge reduction in engine and chassis vibration. the vibration reduction will help decrease rider fatigue!
|
| * Made from 4130 Chromoly Steel: Our Steering Stem is made from 4130 Chromoly Aircraft Tubing. The Top Tube is 1.125 inches 4130 bent tubing and we use large Gusset that extend to the frame mounting clamp. Fully TIG Welded. |
| 100602 |
CAN-AM DS450 2008-09 STEERING STEM, +1" HEIGHT, GLOSS BLACK, INCLUDES ADJUSTABLE LOWER STEERING STEM BEARING HOLDER WHICH INCLUDES ONE BEARING AND TWO SEALS |
| Note: Houser Racing Adjustable Steering Stem Bottom must be used with this steering stem. Requires handle bar clamps (sold separately) # 010701 or 010702 |
|
|
|
